Original Gorilla Glue

Original Gorilla Glue - 2 oz.

Original Gorilla Glue

The product that started it all. Original Gorilla Glue built a name for itself with its incredible, industrial holding power and versatility. The water activated polyurethane formula expands into materials to form an incredibly strong bond to virtually anything making Gorilla Glue your solution for almost any project or repair.

Sizes

SEE PROJECT IDEAS
View product details View Original Gorilla Glue Product Details
Damp it to activate gorilla glue
Glue it, expands, use sparingly
Clamp it, for an incredibly strong bond
incredibly strong for the toughest jobs
Expands three times into the materials
100% Waterproof, indoor and outdoor

PRODUCT FEATURES

  • 100% WATERPROOF: Doesn’t break down when exposed to outdoor elements
  • VERSATILE: Easily bonds wood, stone, metal, ceramic, foam, glass, concrete and much more!
  • INCREDIBLY STRONG: Expands 3 times into the materials to form an incredibly strong bond
  • TEMPERATURE RESISTANT: Bond holds through hot and cold temperatures
  1. Prepare and Dampen the Surfaces

    If you’re using Original Gorilla Glue for the first time, or bonding a new type of material, we always recommend trying a test piece first. To open a bottle larger than 2 ounces, cut the tip of the nozzle where it comes up to a point and starts to indent. The cap is attached to the side of the nozzle.

    Prepare your surfaces: All surfaces must be clean, dust free and tight fitting. For shiny surfaces, such as metals, glass and some plastics, roughen up the material to give the glue something to bite into.

    Damp It: Lightly dampen one surface with water. We recommend using a damp cloth or spraying with water. Do not saturate the surface. For dense hardwoods, lightly dampen both surfaces prior to gluing.

  2. Evenly Apply Gorilla Glue Onto the Dry Surface

    Glue It: Carefully apply onto the dry surface. Do not over apply. We recommend wearing gloves or spreading the glue with a disposable brush. In some instances, Gorilla Glue can be a skin sensitizer. If you are predisposed to skin reactions, please take the extra precaution.

    If you do get the glue on your skin, try removing it with a dry cloth or paper towel first (particularly if the glue is still tacky). If that doesn’t work, try washing with soap and cold water, or using an exfoliator with a gritty texture. Dry your skin and apply lotion. We do not recommend using any kind of alcohol or acetone. This actually strips the skin of its natural oils, which means the glue is more likely to stick.

  3. Clamp the Two Surfaces Together Tightly

    Clamp It: Make sure the clamping pressure is distributed evenly across the surface. Or, if you don’t have a clamp, use heavy objects or Gorilla Tape® to achieve the appropriate clamping pressure. For lighter objects, try using rubber bands to hold the pieces together tightly. Clamp objects for 1–2 hours. For best results, allow 24 hours to cure.

  4. Clean up

    If you need to remove any uncured “squeeze out” or wet glue, we recommend wiping with a dry cloth or using a standard paint thinner. Make sure to read and follow directions if using a paint thinner. Always wear gloves. Once the glue is dry, it is best removed mechanically: Try sanding, chiseling, scraping or picking. The dried glue will not damage tools.

  5. Storage Tips

    After each use, wipe the bottle’s lid and nozzle clean with a dry cloth. For 2 oz. bottles, tightly replace the lid after wiping clean and store in a cool, dry place. For bottle sizes 4 oz. and larger, we suggest squeezing excess air out of the bottle. While still squeezing, tightly replace the cap and then store in a cool, dry place. This helps eliminate moisture in the bottle.

First Aid and SDS information

APPLICATION TEMPERATURE –Above 40 F, best at room temperature

SERVICE TEMPERATURE –-40° to 200° F

OUTDOOR – Yes

MOISTURE RESISTANT – Waterproof

PAINTABLE –Yes – Can be painted with oil-based and spray. Acrylic/latex and stains require sanding

SANDABLE – Yes

STAINABLE – Yes – Will require sanding

EXPANDS WHEN CURED – Yes

CURED COLOR – Tan

TECHNICAL STANDARDS –ANSI/HPVA Type I

STORAGE TIPS  –Store in a cool, dry location. Avoid laundry rooms, under sinks, and kitchen cabinets.

GAP FILLING – No

We realize any DIY project may have a spill and we want to help you with tips and tricks to successfully remove glue from fingers and nails.

For bonded skin, please call 1-800-420-7186 to speak to a medical professional.

Why do I need to add moisture before applying Gorilla Glue?

Gorilla Glue is a moisture activated polyurethane adhesive, therefore, you need to apply a small amount of moisture to one surface. Then apply glue to the dry surface and clamp. For dense hardwoods, lightly dampen both surfaces prior to gluing.

How much Gorilla Glue should I apply?

Apply a thin layer of glue. Gorilla Glue expands up to 3 times so little bit goes a long way. As a general guide, use a ½ ounce per square foot. Be careful of uncured “squeeze-out” or wet glue, particularly on finished furniture.

How do I remove Gorilla Glue from my body or skin?

We strongly recommend wearing gloves while working on any project using Original, Clear or White Gorilla Glue. If you do get Gorilla Glue on your fingers or nails please follow these steps:
1) Try removing the glue with a dry cloth or paper towel first (particularly if the glue is still tacky).
2) If that doesn’t work, try washing with a gritty soap and warm water, or using an exfoliator with a gritty texture.
3) Dry your hands and apply lotion to moisturize your skin.
4) Cured glue on fingers may stain skin temporarily and it may take several days to wear off. It is important to keep hands moist using moisturizers until the glue is fully removed.
NOTE: We do not recommend using any kind of alcohol, acetone, or other solvent.

How do I remove Gorilla Glue from my surface?

If you need to remove any uncured “squeeze out” or wet glue, we recommend wiping with a dry cloth or using a standard paint thinner. Make sure to read and follow directions if using a paint thinner. Always wear gloves. Once Gorilla Glue is dry, it is best removed mechanically: Try sanding, chiseling, scraping or picking. The dried glue will not damage tools.

Will Gorilla Glue bond plastic/vinyl/rubber?

Gorilla Glue will work well on many types of plastic; however, we do not recommend for use on polypropylene (PP) or polyethylene (PE) plastics or any type of rubber with high oil or plasticizer content.

What should I do if I think a human or animal has ingested Gorilla Glue?

For medical emergencies, call 1-800-420-7186 anytime to reach a member of our product safety team.

Additional product safety and first aid information